Restrap Black Switch Direct Mount Adaptor
Love our Switch Rack, but would prefer to use your bike’s frame bosses? The Direct Mount Adaptors are for you. Convert your thru-axle Switch Rack to direct mounting. (Note: if you do not currently own a Switch Rack, it is possible to buy the rack with Adaptors included.)Direct Mount Adaptors for Switch Rack are designed to fit all bikes with horizontal/in line M5 rack/mudguard mounts. All mounting hardware is included.Fitting the Direct Mount Adaptors:Direct Mount Adapters are designed to be compatible with frames which have horizontal / in line M5 mounting positions on the dropoutsThey can be installed onto frames with M5 mounting points on the seat stays, but it is important to ensure that these are horizontal and in line to avoid the rack from binding during installationDirect Mount Adaptors are not designed to be compatible with frames which have M5 mounting positions angled upwards or inwardsFor frames with 135mm and 142mm axles, set the adaptors so the short end is seated within the rack mounting point. For frames with 148mm (boost) axles, seat the adaptors so the long end is seated within the rack mounting point. Place the rack/adaptors over the frame and use the provided M5 bolts to secure. M5 bolts are provided in two lengths, 40mm and 50mm. The correct bolt depends on the spacing and thickness of the dropouts on your specific frameIt is important to ensure that the bolts used do not protrude more than 3-5mm from the inside of the dropouts when installed. This is to avoid any potential interference with your bikes disc brakes rotors or drivetrainCompleting fitting the rack:Ensure the rubberised fabric strap is tightly wrapped around the seatpost or seat tubeUse velcro strap to tightly secure the seatpost/tube mountTighten all boltsCompatibility:Compatible with bikes with 135mm, 142mm and 148mm (Boost) spacingNot designed for use with full-suspension framesSpares:Additional frame mounts are available to purchase separatelyTechnical Specification:Aluminium constructionAllows switch rack compatibility to QR skewer bikes
Price now:
From
£13.99
To
£15.99
Price History:
Details:Restrap Black Switch Direct Mount Adaptor
Love our Switch Rack, but would prefer to use your bike’s frame bosses? The Direct Mount Adaptors are for you. Convert your thru-axle Switch Rack to direct mounting. (Note: if you do not currently own a Switch Rack, it is possible to buy the rack with Adaptors included.)Direct Mount Adaptors for Switch Rack are designed to fit all bikes with horizontal/in line M5 rack/mudguard mounts. All mounting hardware is included.Fitting the Direct Mount Adaptors:Direct Mount Adapters are designed to be compatible with frames which have horizontal / in line M5 mounting positions on the dropoutsThey can be installed onto frames with M5 mounting points on the seat stays, but it is important to ensure that these are horizontal and in line to avoid the rack from binding during installationDirect Mount Adaptors are not designed to be compatible with frames which have M5 mounting positions angled upwards or inwardsFor frames with 135mm and 142mm axles, set the adaptors so the short end is seated within the rack mounting point. For frames with 148mm (boost) axles, seat the adaptors so the long end is seated within the rack mounting point. Place the rack/adaptors over the frame and use the provided M5 bolts to secure. M5 bolts are provided in two lengths, 40mm and 50mm. The correct bolt depends on the spacing and thickness of the dropouts on your specific frameIt is important to ensure that the bolts used do not protrude more than 3-5mm from the inside of the dropouts when installed. This is to avoid any potential interference with your bikes disc brakes rotors or drivetrainCompleting fitting the rack:Ensure the rubberised fabric strap is tightly wrapped around the seatpost or seat tubeUse velcro strap to tightly secure the seatpost/tube mountTighten all boltsCompatibility:Compatible with bikes with 135mm, 142mm and 148mm (Boost) spacingNot designed for use with full-suspension framesSpares:Additional frame mounts are available to purchase separatelyTechnical Specification:Aluminium constructionAllows switch rack compatibility to QR skewer bikes
Price now:
From
£13.99
To
£15.99
This site contains affiliate links for which we may be compensated.
New | £13.99£2.95 Delivery | Store |
Team Cycles | £15.99£4.99 Delivery | Store |
Product Description
Love our Switch Rack, but would prefer to use your bike’s frame bosses? The Direct Mount Adaptors are for you. Convert your thru-axle Switch Rack to direct mounting. (Note: if you do not currently own a Switch Rack, it is possible to buy the rack with Adaptors included.)Direct Mount Adaptors for Switch Rack are designed to fit all bikes with horizontal/in line M5 rack/mudguard mounts. All mounting hardware is included.Fitting the Direct Mount Adaptors:Direct Mount Adapters are designed to be compatible with frames which have horizontal / in line M5 mounting positions on the dropoutsThey can be installed onto frames with M5 mounting points on the seat stays, but it is important to ensure that these are horizontal and in line to avoid the rack from binding during installationDirect Mount Adaptors are not designed to be compatible with frames which have M5 mounting positions angled upwards or inwardsFor frames with 135mm and 142mm axles, set the adaptors so the short end is seated within the rack mounting point. For frames with 148mm (boost) axles, seat the adaptors so the long end is seated within the rack mounting point. Place the rack/adaptors over the frame and use the provided M5 bolts to secure. M5 bolts are provided in two lengths, 40mm and 50mm. The correct bolt depends on the spacing and thickness of the dropouts on your specific frameIt is important to ensure that the bolts used do not protrude more than 3-5mm from the inside of the dropouts when installed. This is to avoid any potential interference with your bikes disc brakes rotors or drivetrainCompleting fitting the rack:Ensure the rubberised fabric strap is tightly wrapped around the seatpost or seat tubeUse velcro strap to tightly secure the seatpost/tube mountTighten all boltsCompatibility:Compatible with bikes with 135mm, 142mm and 148mm (Boost) spacingNot designed for use with full-suspension framesSpares:Additional frame mounts are available to purchase separatelyTechnical Specification:Aluminium constructionAllows switch rack compatibility to QR skewer bikes
Product Specifications
General | |
|---|---|
Color | black |
Material | aluminium |
Brand | Restrap |
Age group | Adult |
Gender | unisex |
Size | one size |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.